![]() ![]() For corridors, elevators, stairs and wells, use the specialized layer TEXT2. These polygons can be used to measure square footage calculations or simply to separate spaces for different departmental uses.Ĭopy the template plan room tags in each space outlined with a polygon in the previous step. Square Footage and Room LimitsĬreate polygonal contours of each usable space within the building using the POLYLINE tool. Be discreet when using them and try to be as austere as possible. Too many of them can have a negative effect on your design. It is as if you were driving on a road where the billboards are mixed with the traffic signs. If there are extra lines and a useless circle or text, it can confuse anyone who looked at your design. The plan should be as simple as possible. Remove any excess such as columns, text, headings, lines and arcs that have no purpose and only confuse your project. Make sure, however, that all the blocks have been exploded using the EXPLODE command and change them to match. In this way, you will create uniformity and avoid confusion between one plan and another. Match both the attributes associated with the layers of walls, and the doors of the template plane with the new plane. Save the drawing frequently after all the following steps. This is one of the most important steps because you will avoid accidents such as deleting by mistake and other problems that may complicate your project. Save the file and do not replace the existing file. With this, you will simplify the process by matching layers and ensure the uniformity of all the plan floors. Paste the plane you just copied into the drawing of the template plane. This existing plan will be called the template plan in the following steps. It is better to choose a building that is similar in size to your project so that the scale factors are uniform. Open the standardized CAD file previously made. In this way you can guarantee the completeness of the transfer. This should be done one floor of a building at a time. Select and copy all the components of the drawing that you are going to move to a plan file that you have previously created. The necessary layers will normally include only walls, windows, doors, stairs and layers with information labels. By doing this, you will erase most of the undesirable aspects of your plane and prepare it for a cleaner transfer. Use this command to freeze unused layers. This way everything will be more efficient and effective. ![]() However, this process will show you how to erase any excess that is not necessary in your plan. Keep in mind that many details can saturate your drawing. Now, open the floor CAD file that you are going to standardize. Make sure the following things are in place:Īrchitectural CAD file of the building you want to clean or convertĬAD file of existing standardized plan 2. You only need to use the tools properly to make them more reliable. It is important to take into account that the plans can be used to calculate various data of a space, construction and direction. For example, 10,000 square foot structures can be completed in between 1.5 and 3.5 hours, if you work efficiently and depending on your knowledge of AutoCAD. Considerations Before You BeginĬreating architectural plans of considerable size can be done in less time than many people believe. Architecture is one of the most benefited areas of this program. The plans created in AutoCAD are one of the key applications of this Autodesk software.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |